Technical data

Download, testing and diagnostics
CPU 317T: Technology Functions
8-18 A5E00251798-03
8.8.7 "Trace" menu
The Trace menu command contains the functions listed in the table below.
Function Meaning/description
Open measurements You can use "Open measurements" to view the logged curves (*.TRC) in the
diagram.
Save measurements Select "Save measurements" to save the recorded curves to a file. This file is
saved per default as a TRC file.
Export measurements Select "Export measurements" to export the recorded signals in a file. The
recorded measured values are stored in the file during the export. You can
export individual measurements or all measurements.
You can export files of the type:
•
TXT (ASCII format):
The values are delimited.
•
XLS (MS EXCEL 5.0 format):
The data can be imported into MS EXCEL and displayed as a diagram.
•
EMF (image file of the Diagram tab):
All displayed curves are exported as a vector graph. This file can be
opened and edited in a picture processing program.
•
CSV (Comma-Separated Value files):
The values are separated with semicolons. This format can be copied to a
spreadsheet program.
Toolbars Use the menu command to show the "Standard", "Functions generator" and/or
"Trace" toolbars.
Timing diagram The "Diagram" menu command can be select further menu commands. The
following auxiliary functions can be displayed:
• Auxiliary lines
• Zoom
• Repeated measurement
• Select several measurements
FFT diagram The "FFT Diagram" menu command can be used to select further menu
commands. The following auxiliary functions can be displayed:
• Auxiliary lines
• Zoom