Technical data

Download, testing and diagnostics
CPU 317T: Technology Functions
A5E00251798-03
8-17
"Function generator" toolbar
The "Functions generator" toolbar is used to control the functions generator.
Function Control
element
Meaning/description
FktGen On
Click this button to enable the function generator. S7T Config
must be in online mode, and the function generator must be
configured.
FktGen Off
Click this button to disable the function generator.
Start of functions
generator coupling
Click this button to couple the start of the two configured function
generators. The two function generators will then be started at
the same time.
Start FctGen
Click this button to start the function generator.
Stop FctGen
Click this button to stop the function generator.
Select FctGen Drop-down
list
Select the function generator you want to configure from the
drop-down list. The list contains two function generators which
you can configure with different values. If the trace is in the Stop
state, FctGen inactive is displayed.
In the next drop-down list and input box, set the
Override Drop-down
list
From the drop-down list, select whether the override must apply
to the amplitude or the offset.
Amplitude / offset Input field At the input box, set the override value for the amplitude or offset.
Allowed are values from 0% to 1000%.
Amplitude / offset Slider You can also use the slider to enter the override value.