Technical data

Download, testing and diagnostics
CPU 317T: Technology Functions
A5E00251798-03
8-13
8.8.3 Starting TraceTool
Make sure the following conditions are satisfied:
1. S7T Config is in online mode.
2. The technology was downloaded to the PLC.
Note
Although you can configure the TraceTool offline mode, you can not record any
values.
In Navigator, select the technology, then select Target system > Trace to start
TraceTool.
The "Trace" dialog box opens on the working area, showing the "Trace", "Functions
generator", "Measurements", "Timer diagram", "FFT diagram" and "Bode diagram"
tabs.
TraceTool with the "Trace" tab