Technical data

Technology objects
CPU 317T: Technology Functions
3-24 A5E00251798-03
Absolute synchronism between the leading and following axes
MasterAbsolute = 1; SlaveAbsolute = 1
In the cam disk, the absolute position of the leading axis is always assigned the
absolute position of the following axis.
Relative synchronism to the leading axis
MasterAbsolute = 0; SlaveAbsolute = 1
The master position is insignificant for synchronization. The master / slave coupling
mode is defined according to the transfer function of the programmed cam disk, but
with random offset at the master.
Relative synchronism to the following axis
MasterAbsolute = 1; SlaveAbsolute = 0
The slave position is insignificant for synchronization. The master / slave coupling
mode is defined according to the transfer function of the programmed cam disk, but
with random offset at the slave.
Relative synchronism to the leading and following axes
MasterAbsolute = 0; SlaveAbsolute = 0
The master / slave coupling mode is defined according to the transfer function of
the programmed cam disk, but with random offset both at the leading and on the
following axes.