Technical data

Technology DBs
CPU 317T: Technology Functions
A5E00251798-03
7-15
SupImpSyncStatus variable
Value Function Comments
0 No synchronism Active mode of the superimposing synchronization object is "No
synchronism."
1 Gearing Active mode of the superimposing synchronization object is "Gearing."
2 Camming Active mode of the superimposing synchronization object is "Camming."
Reserve110 variable
The variable is reserved for internal functions. It does not contain user-relevant
information.
SupImpNumGear/SupImpDenomGear variable
These variables indicate the gear ratio for base synchronism. The
SupImpNumGear shows the coefficient of the leading axis, and the
SupImpDenomGear shows the coefficient of the following axis (referenced to the
superimposing coordinate system of the following axis.). The indicated values
apply to superimposing synchronism.
SupImpPhaseShift variable
Indicates the phase shift between the reference position of the leading axis and the
reference position in the superimposing coordinate system of the following axis.
This value is only valid for superimposed synchronism.