Technical data

Technology functions
CPU 317T: Technology Functions
6-252 A5E00251798-03
ErrorID Error message Description / to correct or avoid error
8116 Value is invalid or not supported Parameter error, command canceled. Invalid or
unsupported value for attribute, number of elements,
parameter number, or subindex, or of a combination.
8117 Illegal format Parameter error, command canceled. Illegal format
8118 Invalid number of parameter data Parameter error, command canceled. The number of
values in parameter data does not match the number of
addresses in the parameter address.
8119 Axis does not exist
Parameter error, command canceled. Attempt to access to
a non-existing axis.
8120 -
8164
Reserve Reserved error codes to PROFIdrive
8165 -
81FF
Manufacturer-specific error Manufacturer-specific error codes to PROFIdrive
Errors are formed by the drive.
Note
In accordance with PROFIBUS DP V1, a DP slave can report the errors A0 to CF.
The errors A0 to CF are mapped to the ErrorID of the technology function as error
80A0 to 80CF.
When output parameter ErrorID reports an error in the range from 80A0 to 80CF
which are not listed in the list shown earlier, consult your DP slave documentation.