Technical data

Technology functions
CPU 317T: Technology Functions
A5E00251798-03
6-177
6.4 Technology functions - Cam disks
6.4.1 FB 434 MC_CamClear - Deleting cams
Purpose
• The "MC_CamClear" technology function deletes all defined interpolation
points or segments of a cam, and sets cam disk editing mode.
• The technological function "MC_CamSectorAdd" is used to create a new cam,
and the technological function "MC_CamInterpolate" interpolates and re-
enables this cam for camming.
Applicable to
• Cam disks
Requirements
• The cam disk may not be in use when you delete it.
• An MC_CamSectorAdd command may not be busy (restriction only applies to
firmware V3.0.x of the integrated technology.)
Overriding commands
An MC_CamClear command can not be canceled by any other command.
An MC_CamClear command does not cancel any other commands.
Input parameters
Parameter Data type Start value Description
CamTable INT 0 Number of the technology DB
Execute BOOL FALSE Starts deletion at the positive edge