Technical data

Configuration

CPU 317T: Technology Functions

A5E00251798-03

4-117

Step Description

The "External encoder configuration - Encoder data" dialog box is

displayed. The contents of the

dialog box depends on the selected encoder type. The figure shows the dialog box for the

SIMODRIVE Sensor encoder.

• ADI4 Settings

Enter the encoder data which you have configured in HW Config at the ADI4.

• Settings for the encoder systems of the drives SIMODRIVE, MASTERDRIVES, etc.

Enter the encoder data which you entered at the drive configuration.

• Settings for SIMODRIVE sensor

Enter the values for the SIMODRIVE sensor as shown below:

Parameter Single-turn

encoder

Multi-turn encoder

Encoder pulses per revolution 8192 8192

Multiplication factor of the absolute actual

value

1 1

Multiplication factor of the cyclic actual value 524288 128

Number of data bits 25 25

Confirm your entry with "Continue".