Technical data

Configuration
CPU 317T: Technology Functions
A5E00251798-03
4-115
Step Description
7.
After the encoder has been selected, the dialog box displays additional information as well as a
fold-down list from which the message type is selected.
In the case of encoder systems of drives the selected telegram type must correspond with the
setting in HW Config (see also Selecting the telegram type ).
• Settings for SIMODRIVE sensor
The "DP_message_frame_81_standard" message type must always be selected in case of
the PROFIBUS encoders SIMODRIVE sensor.
• ADI4 Settings
In the case of ADI4, "DP_Tel3" must always be selected as the message type.
During the selection for the ADI4 the "Drive number" parameter is displayed as a fold-down
list. From this drop-down list, select the encoder number which was configured for this
encoder at AD14.
Confirm your entry with "Continue".