Technical data

Configuration
CPU 317T: Technology Functions
4-104 A5E00251798-03
4.8.2 Configuration
In the Cams > Configuration dialog box, you can set the following items for the
"Cams" technology object:
• Output cam type: Position-based cams, time-based cams, or switching cams
• The system cycle in which the cam is calculated
• Reference values of the cam: setpoint or actual values
• Use of the cam as high-speed cam
Note
Cams also take effect at non-homed axes.
Output
Set the "Enable output" check box to assign a HW address and a logic operation to
the "Cam" technology object.
When output is disabled, the cam can be evaluated only in the software.