Technical data

Configuration
CPU 317T: Technology Functions
4-102 A5E00251798-03
4.8 Configuring cams
Before a cam is used in the user program, the cam first has to be inserted in
S7T Config as a "Cam" technology object.
The function is programmed in the user program at FB "MC_CamSwitch".
(position-based cams / switching cams) or "MC_CamSwitchTime" (time-based
cams). The association to the cam created in S7T Config is set at the CamSwitch
input, by entering the number of the relevant technology DB.
The ON / OFF conditions are configured directly at the block.
4.8.1 Inserting cams
Requirements
• The data of the Technology CPU are configured in HW Config and are
compiled.
• An axis or external encoder is created in S7T Config.
How to insert a cam in S7T Config
Step Description
1.
In the S7T Config Navigator, double-click "Insert cam".