Technical data

Configuration

CPU 317T: Technology Functions

4-70 A5E00251798-03

4.6 Configuring synchronization axes

Requirements

• The data of the Technology CPU are configured in HW Config and are

compiled.

How to insert a synchronization axis in S7T Config

Step Description

In the S7T Config navigator, double-click "Insert axis".

2. When you configure the axis, enable the synchronous operation technology.

This technology requires the "Positioning" and "Velocity control" technologies. You may not,

therefore, disable these technologies.

Perform the steps as described in chapter "Configuring axes".

Result: the synchronization axis appears in the Navigator of S7T Config. The synchronization

object is created automatically for the relevant axis. The object is automatically assigned the

name of the axis, with the suffix "_synchronism".