Technical data

Learning units
3.9 9. Step: Configuration of the SINAMICS drive with S7T Config
Sequence Activity Result
7 The SINAMICS
®
training case on which this document is based has two different motor types. One of the
two motor types has DRIVE-CLIQ technology. The second motor/encoder is connected via SMC20, which
is why DRIVE-CLiQ recognizes that a second motor/encoder is present and creates this, but cannot
automatically configure it. Therefore, not all drive information can be completely configured automatically.
Confirm the warning with "OK".
8 Close the "Automatic Configuration" dialog box by clicking "Close".
CPU 317T-2 DP: Controlling a SINAMICS S120
3-24 Getting Started, 12/2005, A5E00480391-01