Technical data

Learning units
3.6 6. Step: Configuring the drive in HW Config
3.6 3.6 6. Step: Configuring the drive in HW Config
Procedure
Sequence Activity Result
1 In the HW catalog, open the tree structure
SIMATIC Technology > PROFIBUS DP (DRIVE) > Drives >
SINAMICS
.
2 Select the drive component "SINAMICS S120" from the tree structure of the HW catalog.
3 Drag-and-drop this component to the master system of the
DP (DRIVE).
The "Properties – PROFIBUS interface
SINAMICS" dialog box opens.
4 Enter PROFIBUS address "4", then confirm with "OK". The "Properties - SIMOTION Drive" dialog
box opens.
CPU 317T-2 DP: Controlling a SINAMICS S120
Getting Started, 12/2005, A5E00480391-01
3-7