Technical data

Learning units
3.3 3. Step: Changing the transmission rate at the MPI/DP interface
Sequence Activity Result
9 Add a digital input module and a digital output module.
You now have this layout:
3.3 3.3 3. Step: Changing the transmission rate at the MPI/DP interface
Procedure
Sequence Activity Result
1 Open the MPI/DP interface (X1) in HW Config with double-
click.
The "Properties - MPI/DP" dialog box opens.
2 Click "Properties". The "Properties – MPI interface MPI/DP"
dialog box opens.
3 Click MPI(1), then click "Properties". The "Properties - MPI" dialog box opens.
CPU 317T-2 DP: Controlling a SINAMICS S120
3-4 Getting Started, 12/2005, A5E00480391-01