User manual

Connect Tech Blue Heat/Net User Manual
72 Revision 0.17
If there are more ports to map, the Found New Hardware Wizard will appear again. Repeat the
procedure above until all the ports are mapped.
The ports are now mapped, and the Configuration Manager window should appear similar to the
one below.
Figure 37: Configuration Manager Window after successfully mapping ports
Basic
Figure 38: Basic Port Mapping option
The Basic option installs all the available ports of the selected Blue Heat/Net, one port at a time.
It has two list boxes, Blue Heat/Net Port and Local COM Port.
Blue Heat/Net Port:
This refers to the physical COM port on the Blue Heat/Net as labelled on its enclosure. Click
Refresh Available Ports to update this list to reflect the current status.