User manual

Connect Tech Blue Heat/Net User Manual
70 Revision 0.17
Port Mapping
To map the available ports of the Blue Heat/Net (either eight or four, depending on your model),
right-click on Blue Heat/Net # and then select Map Port(s). You can also select Action from the
main menu, and choose Map Port(s).
Figure 34: Map Port(s) menu
There are three modes to Map Ports: Basic, Advanced and Express.
Express
Figure 35: Map Port(s) Express method screen
This will install all the available ports of the selected Blue Heat/Net with one click. The list box
Starting COM Port enables the user to select the starting COM number. If a COM number with in
use is selected, ensure those ports are not attached to a device by going to My Computer ->
Control Panel -> System -> Hardware -> Device Manager -> Ports (COM & LPT).
During the course of port mapping, the Found New Hardware Wizard will appear as follows: