User manual

Connect Tech Blue Heat/Net User Manual
Revision 0.17 63
Software Installation for Windows
The Blue Heat/Net is designed for easy installation and set up.
This section deals with installing and using the Blue Heat/Net software to communicate with
your Blue Heat/Net and its COM ports.
To do so, you will use the CD included with the Blue Heat/Net to install the Configuration
Manager on your computer. The Blue Heat/Net Configuration Manager will allow you install the
Blue Heat/Net on your local system, and map and configure the Blue Heat/Net’s communication
ports.
Installing the Blue Heat/Net Configuration Manager
The Blue Heat/Net Configuration Manager is a tool to control your Blue Heat/Net from your
local Windows operating system. To install the Blue Heat/Net Configuration Manager on your
computer, insert the CD provided with your Blue Heat/Net into the disk drive.
You should see this window in your browser:
Figure 27: Blue Heat/Net Driver/Software Installation CD
NOTE: Windows XP SP2 users should read the SP2 info prior
to installing the Configuration Manager
Select View from the Blue Heat/Net software. It will bring you to the following screen. Click Install to
begin the Configuration Manager installation. Ensure you choose Open or Run when the File Download
window appears and asks if you’d like to open the file or save it to your computer.