User manual

Connect Tech Blue Heat/Net User Manual
38 Revision 0.17
Configuring Your Blue Heat/Net
There are five main configuration options for your Blue Heat/Net. These include basic serial
settings, advanced serial settings, security settings, Blue Heat/Net settings and Firmware. The
Reboot and Change your Password options are also located here. The options for each
configuration screen are described in the following sections.
Configure Basic Serial Settings
Figure 8: Configuring Basic Serial Port Settings (RJ-45 Models)
Figure 9: Configuring Basic Serial Port Settings (DB-9 Models)
This page contains basic or common serial settings. Here you can configure the default baud
rate, parity, start bits, stop bits and flow control for each of your Blue Heat/Net ports. DB-9
models include a Mode option to set the line interface mode. The initial values for each port are:
•
9600 baud
•
no parity
•
8 data bits
•
1 stop bit
•
no flow control