User manual

Connect Tech Blue Heat/Net User Manual
Revision 0.17 37
WCM (Web Configuration Manager)
Signing In to the Web Configuration Manager
You will need to know the IP address of your Blue Heat/Net unit before you use the Web
Configuration Manager. Use the Serial Configuration Manager to assign the Blue Heat/Net a
valid IP address, or tell the Blue Heat/Net to use DHCP to automatically obtain an IP address.
Please refer to the SCM Command Reference documentation for information on how to do this.
Once you know your IP address, open your web browser and go to: http://_your_ip_address_/ or
http://www.hostname.com/
You will arrive at the Blue Heat/Net Web Configuration Manager Sign In page. The default
username is wcm. Leave this name as-is. The default password is password. Use this
username/password combination and click the Sign In button to log on to the Web Configuration
Manager.
Figure 7: Web Configuration Manager Sign In
Once you have signed in, you should immediately
change the default password.
At this point you should be directed to the Web Configuration Manager homepage.
To sign out of the Web Configuration Manager, just click on the Sign Out link on the upper
right-hand side of the Web Configuration Manager.