User manual

Connect Tech Blue Heat/Net User Manual
Revision 0.17 35
TCM Command Reference
The TCM commands contain the SCM commands, in addition to other commands unique to the
TCM. The TCM commands have the same syntax as the SCM Command Reference (see
previous section). A brief command list is provided below. Please note that the * denotes
commands not available through the SCM application. Following this brief list are command
details for the TCM-unique commands.
Brief Command List
•
boot Bootup settings
•
cfg TCM operational settings
•
exit Exits the TCM application
•
help Brief list of available commands and their syntax
•
info Blue Heat/Net general information and Flash verification
•
net Network settings
•
port Serial port settings, and UART information
•
save Save setting changes to Non-volatile (Flash) storage
•
update Downloads (via TFTP) and programs Flash with Loader/SCM
image and Operating System (uClinux) image.
Commands unique to the TCM
•
sec Serial Port Security Settings *
•
stats Network or port statistics *
Command Details
stats
Syntax: stats [option]
Description: This command displays the statistics for a particular network protocol or the
serial driver statistics.
Options: txrx
This displays the number of bytes transmitted or received for each port. It also
shows which port is open, and by what IP, along with a summary of serial
errors. PFO errors are the sum of parity, frame and overrun errors that have
occurred for a particular port.
error
This second serial statistic option provides a breakdown of PFO errors. In
addition the number of serial breaks encountered is shown for each port.
tcp
This displays attributes related to the network TCP protocol.
ip
This displays attributes related to the network IP protocol.
udp
This displays attributes related to the network UDP protocol.
icmp
This displays attributes related to the network ICMP protocol.