Specifications

DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
15
DRIVES AND REMOVABLE STORAGE
1
For hard drives, GB means 1 billion bytes; actual capacity varies with preloaded material and operating environment and will be less.
2
Discs burned with this drive may not be compatible with some existing drives and players; using DVD+R media provides maximum compatibility.
3
DVD-ROM drives may have write-capable hardware that has been disabled via firmware modifications.
4
Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter on the MT and DT and requires a slim line optical drive.
SYSTEM BOARD CONNECTORS
NOTE: See Detailed Engineering Specifi cations for maximum card dimensions.
MT DT SFF USFF
PCI Slot(s)
1
1 1
PCIe x16 Slot(s)
2
1 1 1
PCIe x16 (wired x4)Slot(s)
3
1 1 1
PCIe x1 Slot(s)
3
1 1
Serial ATA (SATA)
4
4 3 3 2
miniPCIe connector(s)
3
1
MT DT SFF USFF
RAID 0 Performance: (includes two matching capacity/speed hard drives)
1TB
1
SATA 7200 RPM HDD (3.5”) X
500GB
1
SATA 7200 RPM HDD (3.5”) X
250GB
1
SATA 7200 RPM HDD (3.5”) X
500GB
1
SATA 7200 RPM HDD (2.5”) X X X
320GB
1
SATA 7200 RPM HDD (2.5”) X X X
500GB
1
SATA 7200 RPM Hybrid HDD (2.5”) X X X
Optical Drive: (SFF/USFF require slim-line optical drive)
Blu-ray Writer SATA X X X X
DVD+/-RW
2
SATA X X X X
DVD-ROM
3
SATA X X X X
Media Card Reader:
Dell 19 in 1 Media Card Reader
4
X X
1
PCI Slots (Support Standard Rev 2.3)
2
PCIe x16 Slots (Support Standard Rev 3.0)
3
PCIe x16 (wired x 4), PCIe x1 Slots, miniPCIe (Support Standard Rev 2.0)
4
Serial ATA ( 2 ports Support Standard Rev 3.0, the rest of ports Support Standard Rev 2.0)