Specifications

③ [DC IN / VIDEO OUT] connector
(1) DC12V input
Connect pin number 2 and / or 11 for DC12V (HOT) and pin number 1 and / or 10
for GND.
(2) Video output
Composite EIA video output (VS) is output from pin number 4(HOT) and
pin number 3(GND).
(3) Input pulses for external sync
When required external sync-operation between other equipment, use either one of
pulse for HD/VD, VS or SYNC. And input HD pulse form pin number 6-5 (GND)
and VD from pin number 7-8 (GND) for HD / VD external sync-operation.
And input VS or SYNC from pin number 9-8(GND) for external sync operation
by VS or SYNC.
T
he alignment of the receptable dip
t
12 terminals
(
male
)
(
rear view
)
① GND
② DC 12V INPUT
③ GND(VIDEO)
④ VIDEO OUTPUT
⑤ GND
⑥ HD INPUT
⑦ VD INPUT
⑧ GND(VD)
⑨ VS(SYNC) INPUT
⑩ GND(VS)
⑪ DC12VINPUT
⑫ GND
④ [VIDEO] connector
Composite EIA video output(VS) is come out from this connector which is employed BNC
type.
7