Specifications

10. SPECIFICATIONS
(1) TV system EIA
(2) Image sensor Interline CCD
①Active pixel
768(H) x 494(V)
②Active image area
a) 1/2 inches 6.45mm(H) x 4.84mm(V)
b) 1/3 inches 4.88mm(H) x 3.66mm(V)
(3) Number of scanning lines 525 lines
(4) Scanning system 2 : 1 interlace
(5) Sync. System Internal / External
(6) Scanning frequencies
① Horizontal drive
15.734 kHz
② Vertical drive
59.94 Hz
(7) Aspect ratio 4 : 3
(8) Illumination
① Standard (F11, 3,000K, 100%output)
a) 1/2 inches(CSH4200) 1,200 lx
b) 1/2 inches(others) 800 lx
c) 1/3 inches 1,500 lx
②50% Output (F1.4, 3,000K, γ :ON,AGC:AUTO, approx. 50%output)
a) 1/2 inches(CSH4200) 2.5 lx
b) 1/2 inches(others) 1.7 lx
c) 1/3 inches 3.0 lx
③ Minimum (F1.4, 3,000K, γ ON, AGC:AUTO, approx. 25%output)
a) 1/2 inches(CSH4200) 1.5 lx
b) 1/2 inches(others) 1.0 lx
c) 1/3 inches 2.0 lx
(9) Video output VS=1.0 Vp-p/75 Ω,positive polarity
(10) Resolution
①Horizontal
570 TV lines
②Vertical
350 TV lines
(11) S/N (luminance) 50 dBp-p/rms or more
(12) External sync. Input HD 4±2Vp-p/High impedance, negative polarity
15.734kHz±1%
VD 4±2Vp-p/High impedance, negative polarity
59.94Hz±1%
SYNC 2±1Vp-p/75 Ω, negative polarity
Horizontal: 15.734kHz±1%
Vertical: 59.94Hz±1%
VS 1.0Vp-p/75 Ω, positive polarity
Horizontal: 15.734kHz±1%
Vertical: 59.94Hz±1%
(13) Signal output
① HD
TTL level, negative polarity
② VD
TTL level, negative polarity
③ SYNC
TTL level, negative polarity
(14) Gamma correction ON(0.45) / OFF(1.0) selectable
(15) Gain control AUTO/STD/MANU
Video level can be adjustable by [GAIN]
potentiometer when MANU.
14