Specifications
Table Of Contents
- Imprint
- Documentation Representative
- © HYDAC FILTER SYSTEMS GMBH
- Contents
- Preface
- Safety information
- Storing the CS
- Decoding the model code label
- Checking the scope of delivery
- CS1000 Features
- CS1000 Restrictions on use
- CS1x1x dimensions (without display)
- CS1x2x dimensions (with display)
- Hydraulic connection types
- Fastening / mounting the CS1000
- Display rotatable/Adjustable As Needed
- CS1000 hydraulic installation
- Electrical connection of the CS1000
- Setting the measuring mode
- Operating the CS1x2x using the keypad
- Overview of menu structure
- Using switching output
- Setting limit values
- Reading the analog output
- Status Messages
- Connecting CSI-D-5 (Condition Sensor Interface)
- Connecting the CS1000 to an RS-485 bus
- Communicating with the CS1000 via the RS-485 bus
- Taking the CS1000 out of operation
- Disposing of CS1000
- Spare Parts and Accessories
- Cleanliness classes - brief overview
- Checking/resetting default settings
- Technical data
- Recalibration
- Customer Service
- Model Code
- EC declaration of conformity
ContaminationSensor CS 1000 Operating the CS1x2x using the keypad
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 44/112
BeWa CS1000 3764916 300 en-us 2012-08-29.doc 2012-08-29
Measuring menu (CS13xx)
During measurement operation, you can perform the following settings:
Selection To do
Start Measuring menu
Press the
o.k.
key.
Scroll to CANCEL and actuate it
Scroll through to CANCEL and press the
o.k.
-key.
If a key is not pressed within 30 seconds, the
system jumps back automatically.
Exit menu and save changes
Scroll through to SAVE and press the
o.k.
-
key.
Measuring menu:
Code
DSPLAY
Select display
SWtOUT
Configure switching output
ANAOUT
Set analog output - output
signal
CANCEL
Discard changes and exit
SAVE
Save changes and exit
DSPLAY - Display after sensor is switched on
DSPLAY
Set start display
+
Code
ISO
3-digit ISO code
NAS 2
NAS class 2
NAS 5
NAS class 5
NAS 15
NAS class 15
NAS 25
NAS class 25
NASMAX
NAS maximum
FLOW
Flow rate range
ANaOUT
Analog output in mA
DRIVE
LED current in %
TEMP C
Fluid temperature in °C
TEMP F
Fluid temperature in °F