Specifications
Table Of Contents
- Imprint
- Documentation Representative
- © HYDAC FILTER SYSTEMS GMBH
- Contents
- Preface
- Safety information
- Storing the CS
- Decoding the model code label
- Checking the scope of delivery
- CS1000 Features
- CS1000 Restrictions on use
- CS1x1x dimensions (without display)
- CS1x2x dimensions (with display)
- Hydraulic connection types
- Fastening / mounting the CS1000
- Display rotatable/Adjustable As Needed
- CS1000 hydraulic installation
- Electrical connection of the CS1000
- Setting the measuring mode
- Operating the CS1x2x using the keypad
- Overview of menu structure
- Using switching output
- Setting limit values
- Reading the analog output
- Status Messages
- Connecting CSI-D-5 (Condition Sensor Interface)
- Connecting the CS1000 to an RS-485 bus
- Communicating with the CS1000 via the RS-485 bus
- Taking the CS1000 out of operation
- Disposing of CS1000
- Spare Parts and Accessories
- Cleanliness classes - brief overview
- Checking/resetting default settings
- Technical data
- Recalibration
- Customer Service
- Model Code
- EC declaration of conformity
ContaminationSensor CS 1000 Operating the CS1x2x using the keypad
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 31/112
BeWa CS1000 3764916 300 en-us 2012-08-29.doc 2012-08-29
Function of the Keys
The following keys are available to you for operating and setting the CS1x2x.
Key Function
o.k.
You jump one menu level down.
You confirm a changed value at the lowest menu level.
You confirm at the top menu level to save or reject a change in
value.
Esc
You jump up one menu level.
In order to leave the menu without changing the values, press
the ESC key until SAVE appears in the display. With the
keys switch to CANCEL and confirm with the
o.k.
key or
wait 30 seconds without pressing a key.
You exit the menu without changing the values.
+
You change values / settings on the lowest menu level.
You scroll through the display
ISO / SAE/NAS / Flow / Out / Drive / Temp.
You move through the menu.
You select numbers.
Once the lowest menu level has been reached, the values in the display will start to
flash.