Specifications

ManualsBrandsConnect Systems ManualsConsumer electronicsCS1000

101

102

103

104

105

106

107

108

109

110

Table Of Contents

Imprint
Documentation Representative
Contents
Preface
- Technical Support
- Modifications to the Product
- Warranty
- Using the documentation
Safety information
- Obligations and Liability
- Explanation of Symbols and Warnings, etc.
- Proper use
- Improper use or use deviating from intended use
- Training and Instruction of Personnel
Storing the CS
- Storage conditions
Decoding the model code label
Checking the scope of delivery
CS1000 Features
CS1000 Restrictions on use
CS1x1x dimensions (without display)
CS1x2x dimensions (with display)
Hydraulic connection types
- Pipe or hose connection (type CS1xxx-x-x-x-x-0/-xxx)
- Flange connection type (Type CS1xxx-x-x-x-x-1/-xxx)
Fastening / mounting the CS1000
Display rotatable/Adjustable As Needed
CS1000 hydraulic installation
- Selecting the measurement point
- Flow rate, differential pressure and viscosity characteristics
- Hydraulic connection of the CS1000
Electrical connection of the CS1000
- Pin assignment
- Connection cable - assignment / color coding
- Connecting cable ends - Examples
Setting the measuring mode
- Mode M1: Continuous measurement
- Mode M2: Continuous measurement and switching
- Mode M3: Filter to cleanliness class and stop
- Mode M4: Filter to continuously monitor cleanliness class
- Mode "SINGLE" measurement
Operating the CS1x2x using the keypad
- Function of the Keys
- Measured variables on the display
- Service variables on the display
- Activate / deactivate keypad lock.
- Display FREEZE
  - Activate display FREEZE
  - Deactivate display FREEZE
- Menus and modes
  - PowerUp Menu
  - Measuring Menu (CS12xx)
- Measuring menu (CS13xx)
Overview of menu structure
- Menu CS 12xx (ISO 4406:1999 and SAE)
- Menu CS 13xx (ISO 4406:1987 and NAS / ISO4406:1999 and SAE 4059 D)
Using switching output
- Mode M1: Continuous measurement
- Mode M2: Continuous measurement and switching
- Mode M3: Filter to cleanliness class and stop
- Mode M4: Filter to continuously monitor cleanliness class
- Mode "SINGLE" measurement
Setting limit values
Reading the analog output
- SAE classes acc. to AS 4059
- ISO Code as per 4406:1999
- ISO code signal acc. to 4406:1987 (CS 13xx only)
- NAS 1638 - National Aerospace Standard (Only CS 13xx)
- Fluid temperature TEMP
Status Messages
- Status LED / Display
- error
- Exceptions Errors
- Analog Output Error Signals
- Analog signal for HDA 5500
  - HDA Status Signal 5 Table
Connecting CSI-D-5 (Condition Sensor Interface)
- CSI-D-5 Connection overview
Connecting the CS1000 to an RS-485 bus
Communicating with the CS1000 via the RS-485 bus
Taking the CS1000 out of operation
Disposing of CS1000
Spare Parts and Accessories
Cleanliness classes - brief overview
- Cleanliness class - ISO 4406:1999
- Table - ISO 4406
- Overview of modifications - ISO4406:1987 <-> ISO4406:1999
- Cleanliness class - SAE AS 4059
- Table - SAE AS 4059
- Definition acc. to SAE
- Cleanliness Class - NAS 1638
Checking/resetting default settings
- PowerUp menu
- Measuring menu
Technical data
Recalibration
Customer Service
- Germany
- USA
- Australia
- Brazil
- China
Model Code
EC declaration of conformity

ContaminationSensor CS 1000 Technical data

HYDAC FILTER SYSTEMS GMBH

en(us)

Page 103/112

BeWa CS1000 3764916 300 en-us 2012-08-29.doc 2012-08-29

RS485 Interface 2 wire, half duplex

HSI (HYDAC Sensor Interface) 1 wire, half duplex