User's Manual

Nano Socket iWiFi G2 N2 –Datasheet
2
Information provided by Connect One Ltd. is believed to be accurate and reliable. However, Connect One Ltd. assumes no
responsibility for its use, nor any infringement of patents or other rights of third parties, which may result from its use. No license
is granted by implication or otherwise under any patent rights of Connect One Ltd. other than for circuitry embodied in
Connect One’s products. Connect One Ltd. reserves the right to change circuitry at any time without notice. This document is
subject to change without notice.
The software described in this document is furnished under a license agreement and may be used or copied only in accordance
with the terms of such a license agreement. It is forbidden by law to copy the software on any medium except as specifically
allowed in the license agreement. No part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including but not limited to photocopying, recording, transmitting via fax and/or modem devices,
scanning, and/or information storage and retrieval systems for any purpose without the express written consent of Connect One.
WARNING: THE Nano Socket iWiFi G2 N2 IS AN RF MODULE INTENDED FOR EMBEDDING IN A HOST DEVICE. LOCAL RELEVANT RF
REGULATIONS SUCH AS ALLOWED FREQUENCIES AND USAGE IN COMMERCIAL FLIGHTS MUST BE OBSERVED. SAFETY
INSTRUCTIONS MUST BE INCLUDED IN THE MANUALS OF THE HOST DEVICE. CONNECT ONE ASSUMES NO LIABILITY FOR
CUSTOMER FAILURE TO COMPLY WITH THESE PRECAUTIONS.