User's Manual

Connect One Confidential
user manual
TX
continuous
mode
MTCM=e e = 1 – enable mode,
e = 0 – disable this mode
SET Inter
Packet Gap
in us
TTO=uS
On uSEC (20-100)
Packet
length
IATO=l Length (1000-2000)
Reset ichip DOWN
4. Example 1: Test TX functions
1. Power up the iChip and the RF processor.
2. Set channel 1:
AT+iMTCH=1
3. Set rate 1 Mbit/sec:
AT+iMTTR=1
4. Set power 15dbm:
AT+iMTRP=15
5. Set SET Inter Packet Gap 20us:
AT+iTTO=20
6. Set Packet length 3000:
AT+iiato=3000
7. Enable continuous transmit mode:
AT+iMTCM=1
8. End test: Either Power-Off or send:
AT+iDOWN
Confidential
Not Approved for Distribution
A
ntennas: Air Wave (EA-79F); Tekfun C. (M04-SR); YC Communication (Q24-24W); Pulse (W1030). Maximum Gain all: 2dBi.
Antenna ：
Manufacture :Connect One’s
Model No.：iW-ANT2-BL:
Antenna gain: 2dBi