Product Info

Connect™ Monitor Instructions Manual
AUGUST 2020
9
FOR ALL INSTALLATION TYPES:
The side closer to the screw holes must be
installed facing the door.
When installed, the barcode should be facing the
back of the cooler, and hence not be visible from
the front.
The front edge of the Connect Monitor should be
installed within 70 mm (2 3/4”) of the point where
the door seals touch the cabinet wall.
This is critical to ensure door opening
detection.
If you can see the barcode label after
installation, Connect MONITOR is
installed facing the wrong way and
door openings will not be detected.
This ensures accurate door detection.
If the device is placed too far from the
door, door opening count will not be
accurate.