Product Info

Connect™ Monitor Instructions Manual
AUGUST 2020
6
The Connect Monitor arrives from manufacturer with Bluetooth
communications configured to OFF to preserve battery and extend usable
life.
Activation of the Connect Monitor turns on Bluetooth communications and
must be performed using an NFC capable device. All other configurations
can be performed over Bluetooth connection.
•
Bulk Activation is designed for use when activating multiple devices
prior to installation;
•
Single Activation is designed for single (or low count) device
activation at the time of installation.
Once activated, the following data must be configured to ensure data
collection and storage for the Connect Monitor:
•
Manufacturer Id
•
Owner Id
•
Brand Id
•
Asset Number
The following data should also be configured when Connect Monitor is
installed into an asset:
•
Model
•
Serial Number
When an asset fitted with Connect Monitor is delivered to a field location, or
installed in outlet, the following data should be entered through the SCS
Field mobile app.
•
Installation Address
•
Additional Data
•
Photos and Notes
Attributes which must be
configured:
•
Manufacturer Id
•
Owner Id
•
Brand Id
•
Asset Number
Attributes which should be
configured:
•
Model
•
Serial Number
•
Installation Address
•
Additional Data
•
Photo and Notes
Please follow all steps in the process defined by your
organization.
The Manufacturer, Owner, and Brand IDs are factory set to
BLANK.