Product Info

Connect™ Monitor Instructions Manual
AUGUST 2020
5
Process Overview
The following process details the steps required for Connect Monitor installation, commissioning, and
activation within the Wellington Connect ecosystem and reporting tools.
The installation process is designed for different scenarios:
•
In-factory installation by equipment manufacturers;
•
Warehouse installation by customers;
•
Field installation by authorized personnel.
An NFC phone is required to activate Bluetooth connectivity. These steps are marked with
the NFC symbol in the process diagram. If no suitable mobile phones are available at
installation site, Bluetooth connectivity needs to be activated in warehouse, prior to field
deployment.
Bluetooth deactivation for transport is not required, except when in accordance to
shipment compliance. Please consult your logistics specialist for requirements.
Wellington recommends Bluetooth deactivation when transit duration is expected to be
extensive, to preserve battery and extend the device usable life.
Connect Monitor is designed to recognize when equipment has been removed from
operation. Therefore, deactivation for warehousing is not necessary.