Product Info

Connect™ Monitor Instructions Manual
AUGUST 2020
26
Connect Monitor LED Indicator
Connect Monitor is equipped with a single LED indicator, used to impart meaningful messages through
flashing sequences.
The operating scheme is as follows:
Connect Monitor State
Pattern
Purpose
Activation successful
Three 5ms flashes at 200
ms intervals
Demonstrates a successful activation,
removed from flight mode, and advertising
Bluetooth.
Supports recognition of firmware startup
and reboot.
Normal operation
One 5ms flash every 30
seconds (rate configurable)
Monitor is advertising Bluetooth and fully
configured but does not have an active
Bluetooth connection.
Normal operation,
incomplete configuration
Two 5 ms flashes every 30
seconds (rate configurable)
Monitor is advertising Bluetooth but with
incomplete configuration (such as missing
asset number or owner ID).
Bluetooth connected
One 5 ms flash every 2
seconds
Indicates Monitor has an active Bluetooth
connection with a device.
Deactivation successful
Ten 5 ms flashes at 200ms
intervals on BT disconnect.
Indicates Monitor is entering deactivated
state, as set through the Field App.
Demonstrates Monitor is entering flight
mode with Bluetooth deactivation.
Flight mode
No flashing
Indicates that Monitor is in its lowest power
state:
Bluetooth is turned off, requiring an NFC
interaction for activation.