Service manual

65
Removing Cooling Fan Motor
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Ensure oven c avity and components are cool before
proceeding.
Ensure electrical power to oven is off.
Disconnect wires from terminals on right hand side of cooling fan (Fig. 26).
Remove (2) screws from Air Deector underneath blower motor, see (Fig. 26)
Remove Air Deector and set aside.
Support Cooling Fan, then remove (4) screws from each fan support brackets
located on each side of Cooling Fan as shown in (Fig. 26).
Remove Cooling Fan from unit.
1.
2.
3.
4.
5.
Fig. 26
Support Bracket
Support Bracket
Air Deector
Disconnect wires
from terminals