Service manual

20
Ensure electrical power to oven is off.
Disconnect all wire connections from SBC. (Always pull from metal terminal not
wires. Pulling on wires can cause damage to wire or terminal).
To release SBC, use pliers to squeeze the top of (4) locking tabs see (Fig. 2).
Carefully lift SBC to release and remove from oven, see (Fig. 1).
1.
2.
3.
4.
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Always touch a metal structure to ground yourself before
handling any electrical compnents
Removing the Single Board Computer
Fig. 2
Fig. 1
Press tabs together to
release lock