Installation Instructions

13
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
Gangway
Instructions for:
Gangway (GW1024), (GW1028),
(GW1032),optional (GHGW5),
(GW1036)
Tools Needed
3/4” Socket wrench
5/8” Wrench or Socket wrench
Not available in metric
Items Included
(1) Gangway Frame
(1, 2 or 3) Decking Panel(s)
(1) Hinge
(2) 1/2” x 2-1/2” Carriage bolts
(2) 7/16” x 2 1/2” Hex bolts
(2) 1/2“ Nuts
(2) 7/16” Nylock nuts
(2) 1/2” Flat washers
(2) 7/16” Flat washers
Step 1
Place Hinge on Float Section and line
up Hinge holes with Float sockets.
Secure Hinge to Float Section using
Carriage bolts, Flat washers and Nuts.
Step 2
Attach Gangway Frame
to Hinge by lining up
brackets with the holes
on the sides of the Hinge.
Insert Hex bolts with end
of bolt pointing outward
as shown. Secure with
Flat washers and Nylock
nuts using Socket wrench
and wrench. Note: If
adding a Roller Kit-Install
Rollers before Step 3.
1000 Series - Low Profile
2000 Series - High Profile
Hinge
1
1/2” x 2-1/2”
Carriage bolts
1/2” Nuts and
1/2” Flat washers
Hinge
Float Section
Hinge
Gangway
Frame
Float Section
2
7/16” x 2 1/2” Hex bolts,
7/16” Nylock nuts and
7/16” Flat washers
POINT HEX BOLT
OUTWARD