Installation Instructions

28
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
2000 Series (HP) Flag Pole
Tools Needed Instructions for:
Accessory Connector-metal
(AC2022MTL), Pole Bracket
(PB2022), Flag Pole (FP2000)
9/16” Socket wrench
Rubber mallet or hammer
Not available in metric
Hardware Included
(4) 3/8” x 1 1/4“ Hex bolt & nut
(1) 3/8” x 3 1/2“ Hex bolt & nut
(1) 3/8” x 2” Hex bolt
(1) 3/8” Diamond washers
Step 1
Insert Stop Bolt in the Pole Bracket.
Step 2
Drive white sleeve into Pole Sleeve
with a block of wood until it touches
the Stop Bolt
Step 3
Attach the Pole Sleeve with the
Accessory Connector-metal with
four bolts in outer holes.
Step 4
Insert Accessory Connector-metal
into the float section socket with
bolt, washers, and bushing. Tighten
bolt to 25 lbs/ft (3.46 kg/m).
Step 5
Attach gold ornament top of
telescoping flag pole.
Pole Bracket
Accessory
Connector
metal
Step 6
Insert Flag Pole into Pole Bracket.
Step 7
Raise and lower Telescoping Flag
Pole and lock in place with Pin
Lock release button.
Step 8
Optional locking device around
lowest release button and locks
with nut & bolt or small padlock.
This keeps anyone from lowering
the pole.
1
3
4
5
6
7
8
2