Installation Instructions

19
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
Cleat
Instructions for:
Cleat (8C1020), (8C1020M)
Tools Needed
3/16” (10 mm) Allen Wrench
Step 1
Hold metal channel flat alongside
plastic straps and slide channel
through hole.
Step 2
Hold ends of straps between
thumb and forefinger and pull
toward you until channel rests
flush behind dock. Slide plastic
cap along straps with other hand
until flange of cap is flush with
dock.
Step 3
Snap straps at dock by pushing
side to side, snapping off straps
level with flange of cap.
Step 4
Place cleat over flange. Insert bolt
through cleat and tighten until
flush against item, then stop.
1
4
2
3