Installation Instructions

22
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
Note: Check all bolts every three months or as needed
to insure all connector hardware is securely fastened.
Finishing Connectors
Use Accessory Connectors to attach
functional accessories to your floating dock.
Hardware Included
Instructions for:
Finishing Connector (FC1000),
(FC2000)
Tools Needed
Phillips screw driver
Step 1
Install Finishing Connectors into sockets
where needed. Secure Connectors into
sockets from top with screw, washer as
shown. Don’t over tighten - Screw is
tapping into the connector.
1
Phillips screw
Round washer
1-877-742-3071 www.connectadock.com
Note: Check all bolts every three months or as needed
to insure all connector hardware is securely fastened.
Accessory Connectors
Use Accessory Connectors to attach
functional accessories to your floating dock.
Hardware Included
Instructions for:
Accessory Connector (AC1000),
(AC1000M), (AC2000), (AC2000M)
Tools Needed
9/16” (16 mm) Socket wrench
Step 1
Install Finishing or Accessory Connectors
into sockets where needed. Secure
Connectors into sockets from top with
bolts, washers, and bushings as shown.
Tighten 1000 and 2000 Series Connectors
to 25 lbs/ft (3.46 kg/m) of torque.
1
3/8” x 1-1/4” (10mm x 35 mm)
Hex bolt
Diamond washer
Bushing