Installation Instructions

45
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
Connect-A-Port 2000 Series Offset
Step 7
Determine port location to the dock,
insert Metal Pole Connectors into float
section connector slots. As in Step 1.
Tighten all bolts in the dock using 25
lbs/ft (3.46 kg/m) of torque.
Step 10
If connecting more then two ports side
by side continue to Step 11.
Step 8
(a)Attach Offset Roller Bracket to port
with bolts, washers and lock washers -
hand tight. (b)Algin Offset Roller
Bracket around Metal Pole Connector.
(c) Center the roller on the Metal Pole
Connector and tighten the bolts.
Tighten all bolts in the dock using 25
lbs/ft (3.46 kg/m) of torque.
Step 9
Follow Step 4 (b) to attach second
roller.
8
(a)
(b)
(c)
port
Roller Bracket
Right-Offset
Roller Bracket
Dock