Installation Instructions

46
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
Connect-A-Port 2000 Series Offset
11
13
Instructions for:
Connect-A-Port (CAP0001)
Connect-A-Port (CAP0002)
2000 Series Offset Attachment Kit (AKO2001)
Tools Needed
(1) 3/4” Wrench
(2) 9/16” Wrenches
Not available in metric
Step 11
Locate a center float section connector
slot, between the Roller Bracket &
Offset Roller Bracket connects. Follow
Step 1 to attach Metal Pole Connector.
Step 12
Follow Step 6 to install roller on to
Offset Roller Bracket.
(a)
Roller
Bracket
Right-Offset
Roller Bracket
Left-Offset
Roller Bracket
Front Side by
Side Bracket
Port
Dock
Left-Offset
Roller Bracket
Step 13
(a) The Offset Roller Bracket will be
bolted on top of the Side by Side
Front Bracket. Test the alginment of
the Offset Roller Bracket to the Metal
Pole Connector to see which bolts
will need to be removed from the
Side by Side Front Bracket.
(b)Remove bolts and attach the Offset
Roller Bracket. (c) Center Offset
Roller Bracket on the Metal Pole
Connector and tighten the bolts.
Tighten all bolts in the dock using 25
lbs/ft (3.46 kg/m) of torque.
(a) (b)
(b)
(c)