Installation Instructions

32
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
Pole Remover
Instructions for:
Pole Remover (PR1002)
Pole
Pole
Pole
2
Step 2
Step 1
Wrap cable around pole 2 to 3
times and over lapping the cable
at least ounce.
Step 3
Insert loop thru other loop to
create slip knot.
Step 4
Insert the attachment loop over the
puller point of the attachment as
shown. Note:Bolt doesn’t have to
be removed to attach cable loop.
Step 5
Remove pole sleeve.
Recommendation
Two people make removing the
poles easier.
Note
See T-Post Puller instruction for
handle installation.
Slide cable down on the pole
and postion puller handle in the
up location to create tension on
the cable.
Step 6
With cable tight push down on
the handle.
Step 6
Repeat step 5 to 7 until pole is
loose.
3
4
5
6
5