Installation Instructions

23
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
1000 Series (LP) Guardrail
Tools Needed Instructions for:
Guardrails (GR1026), (GR1041),
(GR1056)
9/16” Socket wrench
Not available in metric
Hardware Included
(2) 1000 Series (LP) Accessory Connectors
(2) 3/8” x 3/4” Hex bolt
(2) 3/8” Diamond washers
Step 1
Using hex bolts and washers, attach
both 1000 Series (LP) Accessory
Connectors to Guardrail as shown.
Step 2
Install 1000 Series (LP) Accessory
Connectors with attached Guardrail
into sockets where needed.
Step 3
Secure 1000 Series (LP) Accessory
Connectors into sockets from top
with bolts, washers, and bushings
as shown. Tighten 1000 Series (LP)
Accessory Connectors to 25 lbs/ft
(3.46 kg/m) of torque.
1
Guardrail
1000 Series
Accessory
Connector
Note: Check all bolts every three months or as needed
to insure all connector hardware is securely fastened.
3
Recommendation: To add more buoyancy and stability
with Guardrail, use Extra Flotation under Float Section.
2