Installation Instructions

44
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
Connect-A-Port 2000 Series Offset
Instructions for:
Connect-A-Port (CAP0001)
Connect-A-Port (CAP0002)
2000 Series Offset Attachment Kit (AKO2001)
3
Step 2
Install roller closest to the Roller
Bracket. Secure with the washers and
cotter pins.
Step 6
Install roller closest to the Roller Offset
Bracket. Secure with the washers and
cotter pins.
Step 1
Determine port location. Insert Metal
Pole Connectors into float section
connector slots. Tighten all bolts in the
dock using 25 lbs/ft (3.46 kg/m) of
torque.
Tools Needed
(1) 3/4” Wrench
(2) 9/16” Wrenches
Not available in metric
Step 3
Attach the two Roller Brackets to the
front or side of the port. Use the 1/2”
bolts and lock washers (25ft/lbs)(3.46
kg/m).
Step 4
(a)Float port up to Roller Pole
Connectors. (b)Install front rollers.
Leave cotter pins and washers off
when inserting roller axle into the
roller. Next secure roller with cotter
pins and washers.
Step 5
Follow the Side by Side Bracket
instructions and connect all ports
together.
2
1
(a)
4
6
(b)