Installation Instructions

38
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
1-877-742-3071 www.connectadock.com
1501OwnerAvenue,Atlantic,IA50022USA
Connect-A-Port 2000 Series Attachment
Instructions for:
Connect-A-Port (CAP0001)
Connect-A-Port 2XL (CAP0002)
2000 Series Attachment Kit (AKS2000)
2
3
Step 2
Install roller closest to the Roller
Bracket. Secure with the washers and
cotter pins.
Step 1
Determine port location (Front or Side).
Insert Metal Pole Connectors into float
section connector slots. Tighten all
bolts in the dock using
25 lbs/ft (3.46 kg/m) of torque.
Tools Needed
(1) 3/4” Wrench
(2) 9/16” Wrenches
Not available in metric
Step 3
Attach the two Roller Brackets to the
front or side of the port. Use the 1/2”
bolts and lock washers (25ft/lbs)(3.46
kg/m).
Step 4
(a)Float port up to Roller Pole
Connectors. (b)Install front rollers.
Leave cotter pins and washers off
when inserting roller axle into the
roller. Next secure roller with cotter
pins and washers.
1
(a)
4
(b)