Datasheet

Programming voltages:
The switching regulators for the programming voltages are
controlled by D/A converters in 100 mV steps. Further D/A converters are used to control the
logic levels (1.3V ... 5.0V) and the input threshold (0.5V … 5.0V). All the voltages are
permanently monitored by an independent coprocessor.
In System Programming (ISP): The signals for in-system programming can be taken from a
separately available ISP adapter or directly from the ZIF socket. The help system provides
information about the wiring of the target system for all the supported components.
JTAG Support: Delete, program and verify components with JTAG interface (joint test action
group, IEEE Std. 1149.1 ). The following formats are supported: SVF-Script in XSVF(Xilinx)
format; JAM byte code player (ALTERA).
Security: Prior to each operation, GALEP-5 checks the power consumption, the correct
positioning and the contacts for all the pins of the selected component. This prevents the
accidental damage of the component or the device.
Software: GALEP-5 builds on the award winning GALEP-32 software. The program runs
under Windows 95, 98, ME, NT4, 2000, XP and Vista. it features a comprehensive set of
functions such as read, program, compare and delete, along with easy-to-use custom
configuration options for any special functions required by the selected component. The
editor comes with a multitude of functions for editing component contents, which can be
saved and loaded in binary, intel-hex, motorola-s or jedec file format. Mass production is
supported by providing statistics functions and serial number generation.
The software is permanently improved for supporting new components. Free updates are
available on our website on a regular basis.
Adapters:
GALEP-5 programs all components in DIL sockets up to 48 Pins between 300 …
600 MIL (ca. 7,5 … 16 mm) wide, without additional adapters.
Modern electronics products contain mostly SMD components. Universal SMD adapters are
available for all components with up to 48 pins. Only one adapter per socket is required; few
adapters mean less system costs!
Of course adapters for components with more than 48 pins are also available. Because the
pin number of the programming device is smaller than the pin number of the components,
such adapters are always specialized. If you have to program components with a high pin
number frequently, a GALEP-5D (with up to 240 pins) might be the more effective solution.
All GALEP-4 adapters can be used with GALEP-5!
GALEP-5 features:
•
48 pin ZIF socket
• 48 universal pin drivers
• 200 MIPS ARM-9 RISC CPU
•
64 MB RAM
• 8 MB Flash RAM
• FPGA (50K gates, 64Kb RAM)
•
High speed USB 2.0 interface
• 3 linear voltage regulators for the internal power supply
• 4 switching regulators for programming voltages
•
2 linear voltage regulators for logic levels and input threshold
•
Built-in microcontroller that monitors the internal power supplies
• Built-in microcontroller that monitors the programming voltages
• 8-channel D/A converter
•
16-channel A/D converter