Datasheet

Batch mode: Run GALEP-5D from the command line, or implement GALEP-5
commands in your own production software. The programmer can be completely
controlled by a set of powerful batch commands.
Updates: The software is permanently improved for supporting new components
(device list). If you need a certain device that's not yet supported, use our free Device
on Demand Service or ask on the Forum. Free updates are available on our website
in regular intervals.
JTAG Debugger
With GALEP-5D you can debug all Microcontrollers with JTAG interface that are
supported by the OpenOCD (On Chip Debugger) software - ARM7, ARM9, XScale,
and Cortex-M3 MCUs. The chip to debug is simply put into GALEP's programming
socket or connected with GALEP through a cable or ISP adapter (please find details
in the OpenOCD documentation). Additionally you can easily define test algorithms
for in circuit testing of complete circuit boards (Boundary Scan) for small series
production. This way your GALEP-5D becomes a complete development, test and
production system!
Security
Prior to each function, GALEP checks the power consumption, correct positioning,
and the contacts of all pins of the selected component. This prevents accidental
damage to the component or the device.
Modules and Adapters
A main advantage of GALEP-5D is the innovative module concept. In seconds the
DIL module can be replaced with a module for a different socket. Due to the high
output pin count, only a single module or adapter is required for supporting all
programmable devices with a certain socket. For instance, one QFP-120 GALEP
module replaces about 30 specialized QFP-120 adapters required by competitor
products. When frequently programming high pin components, a GALEP-5D-240 has
quickly brought in its price.
GALEP-5D comes with a DIL-48 module for all components in DIL sockets of up to
48 Pins. All existing GALEP-4 and GALEP-5 adapters can be used with the DIL-48
module of GALEP-5D.
Technical Specifications
§ Format: ca. 118x172x22mm (+7mm socket)
§ Weight: ca. 750 g, single block aluminium case
§ DIL Module with 48-pin ZIF socket included
§ Up to 240 universal pin drivers
§ Programs low-voltage components down to 1.3V
§ Mini USB 2.0 high-speed port, plus Ethernet 10/100 port
§ SD memory card slot
§ 200 MIPS ARM-9 RISC processor, 128 MB RAM, 8 MB Flash
§ Hardware acceleration through FPGA (50K gates, 64Kb RAM)
§ 3 linear voltage regulators for internal power supply
§ 4 switching regulators for programming voltages
§ 2 linear voltage regulators for logic levels and input threshold
§ 2 Microcontrollers for internal voltage monitoring
§ 8-channel D/A converter, 16-channel A/D converter
§ Embedded Linux 2.6 inside