Installation Instructions
Specialty Adhesives - Use Mapei G21 or G15 when installing Structure in hospital rooms or medical facilities where Hill-Rom beds are used or where frequent surface wetting will occur such as in grocery store produce areas. Recommended Substrates for AD-62 Adhesive • Porous Substrates (Concrete, wood underlayment and patching and levelling compounds) - Before installing flooring allow adhesive to dry/flash for 5 to 10 minutes.
or other adhesive. These products may contain asbestos fibers or crystalline silica. Avoid creating dust. Inhalation of such dust is a cancer and respiratory tract hazard. Smoking by individuals exposed to asbestos fibers greatly increases the risk of serious bodily harm. Unless positively certain that the product is a non-asbestos containing material, you must presume it contains asbestos.
Installation Recommendations Layout Layout will depend on the product size and adhesive system being used. Snap a chalk line down the center of the floor parallel with the long dimension of the room. Adjust the chalk line if necessary to avoid narrow pieces at the walls. When installing 18”x 18” or 18”x 36” tiles it will be necessary to snap additional chalk lines perpendicular (90°) to the center line. Also see special instructions for AD-62 wet-set adhesive applications.
