User`s guide

9.4.13 Super I/O Submenu

Feature Options Description

Serial Port 0 Disabled

Enabled

Enable or disable serial port 0.

Device Settings IO=3F8h; IRQ=4; Fixed conguration of serial port 0 if enabled.

Serial Port 1 Disabled

Enabled

Enable or disable serial port 1.

Device Settings IO=2F8h; IRQ=3; Fixed conguration of serial port 1 if enabled.

Parallel Port Disabled

Enabled

Enable or disable parallel port.

Device Settings IO=378h; IRQ=7; Fixed conguration of the parallel port if enabled.

Device Mode Standard Parallel Mode

EPP Mode

ECP Mode

EPP Mode & ECP Mode

Set the parallel port mode.

Note

This setup menu is only available if an external Winbond W83627 Super I/O has been implemented on the carrier board.

9.4.14 Console Redirection Submenu

Feature Options Description

COM0

Console Redirection

Disabled

Enabled

Enable or disable serial port 0 console redirection.

►Console Redirection Settings submenu Opens console redirection conguration sub menu.

COM1

Console Redirection

Disabled

Enabled

Enable or disable serial port 1 console redirection.

►Console Redirection Settings submenu Opens console redirection conguration sub menu.

Serial Port for Out-of-Band management/Windows Emergency management Services (EMS)

Console Redirection Disabled

Enabled

Enable Console Redirection Settings setup Node for EMS.

►Console Redirection Settings submenu