User`s guide
Copyright © 2012 congatec AG TCEDm10 83/94
9.4.10 SATA Submenu
Feature Options Description
SATA Port Information no option Displays the name of the connected Hard Disk or DVDROM when the port is enabled. Empty is displayed when
the port is enabled but nothing is connected to it.
SATA Controller(s) Enabled
Disabled
Enable or disable the onboard SATA controllers.
Congure SATA as IDE
AHCI
Select SATA controller mode.
Port 0 Speed Limit No Limit
GEN1 Rate
GEN2 Rate
Controls the Port 0 Speed Limit.
Port 1 Speed Limit No Limit
GEN1 Rate
GEN2 Rate
Controls the Port 1 Speed Limit.
SATA Port 0 Enabled
Disabled
Enables Port 0.
SATA Port 0 Hotplug Enabled
Disabled
Congures this Port as Hot Pluggable.
SATA Port 1 Enabled
Disabled
Enables Port 1.
SATA Port 1 Hotplug Enabled
Disabled
Congures this Port as Hot Pluggable.
SMART Self Test Disabled
Enabled
Run SMART self Test on all Hard Disk during POST.
9.4.11 iFFS Submenu
Feature Options Description
IFFS Support Disabled
Enabled
Indicates support for Intel Fast Flash Standby.